Introducing the 3d Didge!
A 52" 3D printable Didgeridoo. Optimized for easy printability, minimal filament usage, and no supports.
Expandable by reprinting part B as many times as you wish to make lower tones.
Split into 8" sections this Didge features a 30mm ( 1.18" ) mouthpiece and a 93.5mm ( 3.68" ) bell.
Printed effectively at 100% infill using 5 perimeters, each section has a small lip and is designed to snap together easily. Due to how thin the walls are, I recommend super gluing each section together. This provides rigidity and seals any air leaks, improving the sound. As stated above, Part B can be reprinted multiple times to extend the length and deepen the tone and tune your didge to how you like it.
( You may need you shorten the height of the print if it reaches your printers limits It will change the tone of your Didge but reprinting part B can help fix that. )
Everyones printer is a lil different so I recommend slicing off the bottom of Part A and the top of Part B and printing those two parts alone to test fit them together before printing the whole Didge. It should form a snug fit
Sound test coming soon!
Have fun n happy printing<3
The author marked this model as their own original creation.