Fan Box Stand

After designing and building my first 75mm FPV Whoop, I needed a fan to keep the VTX cool while adjusting the parameters in BetaFlight… So I designed and 3D printed one.

Parts required:

1 x 8010 5v DC (USB) fan (80mm by 80mm by 10mm)

4 x M3 * 25mm socket cap screw (35mm max)

Print set-up:

PLA or PETG, 0.4mm line width, 0.2 layer height, 2 walls, 6 top/bottom layers, and 10% gyroid infill. Doesn't require support, and can be printed with or without a brim.