Honeycomb minimalistic shelf (16x15 cm)

A small (16x15 cm) shelf for your bathroom or any room with a minimalistic see-through honeycomb design. I created slots so that it's easy to put together, you have to use a few drops of super glue though to make it rigid. Can be mounted to a wall with a transparent doublesided tape. Pretty fast and easy to print, I printed mine with 150% speed on MK3S+ with no issues.

VERY IMPORTANT! Set your slicer to 20% honeycomb infill, zero top and bottom layers and 5 perimeters, recommended layer hight is 0.2 mm. Or download the 3mf project, where everything is already set correctly. You can print the main surface first, all the other parts will fit on Prusa MK2/3/4 print surface at once. I printed mine with PLA, but you can consider using PETG if you plan on placing heavier items on the shelf.

Let me know if you like it and make sure to post photos of your results, happy printing! :)