Maximum Inner Diameter of the Hole is 31mm.
This is a Ikea Skadis Holder for your E-Liquid Bottles.
To be exact the 60ml ones.
Should Fit Standard 60ml Bottles, 30mm Diamater.
I also tried to Minimize the Use of Supports by putting the Base Plate on the Exact Same Height as the lowest part of the Pegs.
If you have any Problems please Comment or write me Private I‘d Love to Help.
**UPDATE**
Download V1.6 if you want the Holes between the Back Plate and the Circles and Download V1.7 if you want these 2 Holes Filled out (its a few Minutes Quicker with them Filled out).
How I Designed This:
First of I took the most Suitable Skadis Peg Model from @Rkimmell73 's Models (https://www.thingiverse.com/thing:3734897) and put a 2mm Plate as a Base, then I just put 3 Cylinder's at the same Distance to Each other on the base Plate and Cut out another Cylinder for each one that was 4mm thinner in Diameter so the Circles would have a Wall of 2mm.
Extruded some extra Stuff in or cut away and Chamfered some Corners
Done.
The author remixed this model.