Adventure Force Nexus Pro and Aeon Pro Long Barrel Clamp Trunnion

I made several variations of the original design by haphazardlynamed.

Also, it requires an M5 nut and M5x16mm bolt (the original post says 10mm but that was too short).

I've added versions that are

• Aeon Pro compatible
• Made for 17/32" brass barrels
• Flipped in orientation so that the bolt goes through the left side and any extra sticks out of the right side
• Compatible with pan head bolts (whereas the original required < 9mm head aka socket head only)

All of the versions are appropriately named to indicate the variation that they are.