Lexan/Polycarbonate/Acrylic Lamp base

Version 3 of the "Fortnite lampbase" i made for one of my kids.

Lampbase that fit a RGB LED strip 150mm long, and lexan (glassv acrylic/plexiglass) max thickness 4mm.

The lampbase is 3D printed in black PETG top/bottom and transparent middle, any other material would probably be ok.

Lexan is cut/engraved on my CNC using 90 degree V-bit.( a dremel or similar tool can be used to make an engraving if you do not have access to a cnc of course.

No supports needed if printed in the orientation of the provided STL files.

Size of LEDstrip used are 150mm long, 8mm wide and about 2mm height.

I also connected an IR remote RGB controller on the outside of the base.

Print Settings

Printer Brand:

Prusa

Printer: 

i3 MK3

Rafts:

No

Supports: 

No

Resolution:

0.20

Infill: 

10

Filament: Fiberlogy PETG Black and transparent

Notes:

If printed in the orientation of the stl files, no supports are needed.

Category: Other