Fixation for magnet board "blomus MURO"

Appreciating the design of the perforated stainless steel magnet board from blomus I use them in my office at home.
But there is only one drawback:
The board is mounted with 2 screws on the top only.
Pushing away a strong magnet lifts the bottom of the board from the wall.

So I decided to design a locker to fix it on the bottom side as well. It should be an aesthetic (means: invisible) solution.

The designed fixation is mounted behind the board and can be opened and closed with a screwdriver. When printed with black material, it is almost invisible.

My boards are 40x80cm. I assume that the fixation may work for other sizes as well. But obviously only for the perforated ones.

Needed material:

• 2x screws 4 x 50mm
• 2x wall plug 6mm

History

Version 0.1.0
*First published version and currently in use.

Print instructions

Rafts: Doesn't Matter
Supports: No
Resolution: 0.3mm
Infill: 100%
Filament: PLA is fine