Ultracompact CR-10 Standalone Project - Power Supply Mounts

Power Supply Mounts

I picked up a CR-10 V1 and wanted a few upgrades and to get rid of the original control box. I tried a few different standalone projects, didn’t find one that I really liked, or that needed excessive modifications. I decided to build my own and 20 revisions later this is what I have. The print you download is what you see in the pictures and should fit both the original using original screws.

I minimized what was needed for the print itself and did my best to minimize changes to wiring. You will be able to keep the aviator connectors in place but will need to lengthen the Mosfet to Power Supply wires, along with the main power wires. There are a few minor nuts/bolts inserts.

As part of the Ultimate Standalone project there are also:

Ultracompact CR-10 Standalone Project - Control Housing

Ultracompact CR-10 Standalone Project - Legs

Ultracompact CR-10 Standalone Project - TFT35

You will need the following bolts for connecting the power supplies socket.

12 – M4x8 bolts – For Mount to Frame Connection.

12 – M4 T-Slot Nuts – For Mount to Frame Connection.

4 – M4x8 bolts For Mount to Power Supply

Basic guide Assembly:

1. Remember to label all cables before doing anything.
2. Remember to label all cables before doing anything.
3. Add 4 Bolts and T-Slots Nuts to each of the Mounts at the flat end. 
4. Add 2 Bolts and T-Slots Nuts to each of the Mounts at L Shape end.
5. Use 4 screws to attach the mounts to the Power Supply
6. Mount the T-Slots nuts and tighten all the bolts at the flat end. Tighten.
7. Reverse Step 5.
8. TIghten the remaining T-Slots at the L Shaped end.
9. Repeat Step 5.
10. Think about how dumb step 5 is, come up with a better idea and remix it.