Jewelry holder with tray(s)

This is a jewelry holder that I came up remixing, because I didn't find one, that matched my needs. 

The waffle stand made a perfect base for it, light and quick to print. I added a sleeve for a M8 threaded rod i had in my stuff. 

Then I designed a tray and added the same sleeve for an M8 rod. I printed three of it, to make it a multi-tier stand for all the little bits and pieces cluttering my nightstand, bathroom and dresser.

On top I wanted to set up the deers antlers as the tree part, so I took that piece and gave my top sleeve a slot to fit the tree in.

Tree and base are printed in Prusament PLA Galaxy Silver and the trays and top piece are printed in Prusament PETG Signal White. Just used the colors I had in mind, ignoring the material mix. I added the print files for PETG, that should work just as well.

Calculation for the length of the rod:

• base: 15,5 mm
• each tray: 20mm
• top: 12 mm

I had some cork coaster from IKEA, that fit surprisingly well in the trays, but they are optional.

Have fun!