ORPHEUS - Fully 3D Printable Guitar

Print each part with high infill and perimeters values. The only part that needs supports is the Upper Neck. Frets are made with filament.

Bill Of Materials

Filament:

• 1.350 Kg of PLA
   

Screws:

• 3 M4*25mm
• 1 M6*60mm
• 3 M3*15mm
• 2 M3*20mm
• 2 M3*25mm
• 11 M3*12/10mm
   

Tools:

• M3, M4, M6 tap and die
• Spatula/brush
• 2,3,5 mm hex allen key with ball end/screwdriver for elecronics
   

Other:

• 360*Ø8mm aluminium cilindric rod
• Some superglue/plastic glue
• 240 grit sand paper
• Bellcat fly 6000 (or a pickup for acoustic guitar compatible with the design)
• Super slinky electric guitar strings (9-42)