Bungee adaptor for Suunto D6i

After buying a dry suit I realized that my D6i dive computer will not fit on my wrist compfortably, even with the wrist strap extension. 

Therefore I made this adaptor to securely mount the computer with normal bungee cord. 

The holes are 4.5mm. This kind-of works with 5mm bungee, but is a bit of a hassle. Better use 4mm or even 3mm bungee. 

You need to print two brackets. The brackets are secured with screws which are hidden unter the bungee cord loops on the top. 

The bottom part has 4 embedded nuts to firmly hold the brackets. Add a print pause to insert the nuts. 

You will additionally need:

• 4x M2.5 nuts
• 4x screws, M2.5x10mm, countersunk
• Consider using stainless steel, especially if you intent to use the adaptor in salt water.

(bought mine as a set here: https://amzn.to/3MAyeaK, not available right now, but you can look for something similar.)