SV06 Z Axis Guides

Update 05/29/2023: I noticed when printing version with the bearing hole on the top the inset for the lip is so close to the edge that it doesn't quite connect and looks a little funky. I don't care about having the bearing be flush with the top, but maybe you do.  I've added a fourth option that has the hole for the bearing but doesn't have the inset for the lip of the bearing.

Update 05/28-2023: Reuploaded the models with some minor fixes and added a bearing test block with the same dimensions as the models so you can check your tolerances before commiting to a long print. 
 

I've modified the official STEP files to try and fill out all the gaps and make it as solid as possible. My hope is that this will allow for more printing orientations. 

There are three versions. 

1. A more solid version of the original. No changes to mounting holes, just filling out the gaps used for injection molding.
2. A version with a passthrough for longer lead screws. The SV06 lead screws are like 376mm and I couldnt' find that size anywhere so I figured a passthrough would allow people to use standard 400mm lead screws.
3. A version with a passthrough for longer lead screws and an insert for F688ZZ Flanged Ball Bearings (8x16x5mm) which is the same size as the insert which is on the underside of the OEM brackets. 
4.  Passthrough for longer lead screws, and a flush insert for F688ZZ Flanged Ball Bearings