Organic Voronoi Phone Stands

How to print

The 3mf files have all the support settings configured for you, so you just need to choose your filament profile.

Prints just fine with a 0.3 mm layer height, but you can use a lower one to get nicer-looking curves. All the stands in the pictures are printed at 0.3 mm.

An interesting problem I discovered when designing this

• Currently (2.6.0 beta 2), organic supports try to avoid crossing through the same object they are supporting, as well as other bodies that are considered parts of this object.
• Organic supports will HAPPILY generate right through another object
• At least one part of the object has to touch the bed, otherwise prusaslicer will drop it down automatically. As of 2.6.0 beta 2, you cannon disable this
• Although organic supports are stable enough during printing, the phone stand would not be able to support a phone with just these supports (unless i make them super thicc)
• To solve this, I added a base that is a separate object, so the supports will fuse to it, giving the stand something to stand on. I've also added a 0.01x0.01 cylinder as part of the main object, which prevents prusaslicer from snapping it to the bed.