customizable soap / sponge dish / holder - normal with plate or organic support

Choose your preferred soap dish geometry that can be printed normally (with a plate) or with tree support.
In the contest Organic Supports
84
262
7
1584
updated November 26, 2023

Description

PDF

Hi everyone!
This is a library of geometric dish soap that can be printed normally (without supports) or printed more artistically with organic supports.

Customize your dish

Use PNG, SVG, or JPG Images to generate custom soap dishes using the Webapp (https://3dpattern.streamlit.app/). 

Or check the code on the GitHub page (https://github.com/Lucandia/3d_pattern.git).

Make sure the lines in the images are fully connected to avoid free brodies or use the grid (as an example check ‘mario-grid .stl’)

Dish geometries:

  • Oval
  • Square
  • Rectangular

Current dishes:

  • Swirls 
  • Waves
  • Honeycomb 
  • grid
  • Geometry 4
  • Geometry 5
  • Mario- grid
  • Dog-grid

These dishes are in the Oval folder. I recently added the Square and Rectangular shapes, so I will update them over time

Water-collecting plate:

  • Opening on the long side
  • Opening on the short side

If you want to try organic support, make sure you well-tune your printer and your settings. I share which settings I used to increase the strength of my support, but I'm not an expert with Prusaslicer so consider them just an example.

Common doubts:

  • The top surface of the model has a slope to keep the soap in place.
  • The channels of the geometric shape are large, the soap residues can be easily washed away
  • The soap doesn't get stuck on the dish 

Enjoy!

    Luca

I am a student who enjoys 3D printing and programming. If you want to support me with a coffee, just click here!

Note:

In the organic support picture, the design is an older version.

Tags



Model origin

The author marked this model as their own original creation.

License