Handwheel - Estlcam - ColdEnd - OCS2 - WiFi

This is my handwheel design for the ESP32 Panel PCB: https://shop.altholtmann.com/ESP32-Panel-Platine/SW10030

Features:

• WiFi control over an OPEN-CNC-Shield 2
• WiFi control over an ColdEnd32
• Web interface for configuration
• Space for Powerbank
• Adjustable(I have included.STEP and .f3d files)

Parts:

• 6x Momentary Buttons 16 mm
• 1x Lachting Button 16 mm (ENA function)
• 3x 10K Poti
• 1x 4-Axis Joystick(3-Axis + Button)
• 1x 0.96" I2C OLED Display
• 1x On/Off switch
• 8x 3D inserts: M3 - diameter 5 mm - length up to 6 mm

Check out this YouTube Video for more Information(german): https://youtu.be/H5HAdbaM4jw

More Links:

• Software/Firmware ESP32 Panel: https://github.com/timo1235/ocs2.x-esp32-panel-software
• Software/Firmware OCS2: https://github.com/timo1235/ocs2.x-esp32-software
• Software/Firmware ColdEnd32: https://github.com/timo1235/ColdEND32-WiFi

I have included the files for different PCB versions. 

• All PCBs up to version 1.05
• All PCBs from version 1.06 and above (Only the Power USB connector and the position of the RJ45 Socket changed)
• PCB integrated battery - this case does not need a powerbank since the PCB has onboard 18650 batteries

Print information:

• May print the Front with support

Print Settings

Supports:

Yes

Category: DIY