Christmas tree with neopixel
Descrizione
PDFChristmas tree printed with lighting control using a neopixel ring to decorate your home at Christmas time.
-The tree was printed without filling and with 0.8mm walls, I recommend printing with 0.2mm layers so that the layers with the illumination are not noticeable
-Rest of printed components with normal parameters of my printer and 0.2mm layers
-https://youtu.be/qx2s\_TSmUCk
-https://youtu.be/BVnaQ3gmOuE
ELECTRONICS
-Nano Arduino
- 12 led neopixel ring
- 8 led noepixel ring
- 1 led neopixel ring
This tree is permanently connected to the light although you can also put a battery to make it portable
Print instructions
Category: DIY Summary
Christmas tree printed with lighting control using a neopixel ring to decorate your home at Christmas time.
-The tree was printed without filling and with 0.8mm walls, I recommend printing with 0.2mm layers so that the layers with the illumination are not noticeable
-Rest of printed components with normal parameters of my printer and 0.2mm layers
-https://youtu.be/qx2s\_TSmUCk
-https://youtu.be/BVnaQ3gmOuE
ELECTRONICS
-Nano Arduino
- 12 led neopixel ring
- 8 led noepixel ring
- 1 led neopixel ring
This tree is permanently connected to the light although you can also put a battery to make it portablePrint Settings
Printer:
BQ Apaleada
Rafts:
No
</div>Supports:No
Resolution:
0.2mm
</div>Infill:0%-20%
Filament: xataca; Smartmaterials PLA Yellow; Smart glow
Notes:
Flowerpot and led base Xataca
Tree Smartmaterials
Tags
Origine modello
L'autore ha contrassegnato questo modello come una sua creazione originale. Importato da Thingiverse.