{"data":{"model":{"id":"488183","slug":"ultracompact-cr-10-standalone-project-control-hous","name":"Ultracompact CR-10 Standalone Project - Control Housing","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"0E-10","myRating":null,"ratingCount":0,"description":"

I picked up a CR-10 V1 and wanted a few upgrades and to get rid of the original control box. I tried a few different standalone projects, didn\u2019t find one that I really liked, or that needed excessive modifications. I decided to build my own and 20 revisions later this is what I have. The print you download is what you see in the pictures and should fit both the original and a BigTreeTech SKR Mini E3 V3.

I minimized what was needed for the print itself and did my best to minimize changes to wiring. You will be able to keep the aviator connectors in place but will need to lengthen the Mosfet to Power Supply wires, along with the main power wires. There are a few minor nuts/bolts inserts.

This control box has two lids, one that has an opening for a Screen, and one that doesn\u2019t if you are going to run Klipper and connect directly to a Raspberry PI.

As part of the Ultimate Standalone project there are also:

Ultracompact CR-10 Standalone Project - Legs

Ultracompact CR-10 Standalone Project - Power Supply Mounts

Ultracompact CR-10 Standalone Project - TFT35

For the Control Box Section Project, I also used:

7 - Brass Threated Insertion Nuts and Bolts (Motherboard\\Mosfet)

4 \u2013 Brass Threated Insertion Nuts and Bolts (To secure the lid)

4 \u2013 T-Slot Nuts and Bolts (Case to Frame)

A couple bits of wiring to extend the power lines as needed (You may mount yours differently, so your length may vary.

Optional:

4 \u2013 Bolts (Exhaust Fan)

1 \u2013 XH-2Y connector for the fan if you are using a Mini E3

Basic guide Disassembly:

Remember to label all cables before doing anything.
Remember to label all cables before doing anything.
Remove the power supply, motherboard, 80 MM fan, and the rubber grommet from the case.
Remove the power supply plug.
Disconnect and remove both aviator connectors from the case.
Remove the screen if you need it too.

Basic guide Assembly:

Using a soldering Iron install all the Threaded Inserts
Install the grommet.
Install the motherboard.
Install the Mosfet.
Install the two aviator connectors.
Connect the case to the frame.
Feed all the Stepper motor/end stop wires through the grommet.
Attach Fan to the lid.
Connect all wires.

","category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","description":"Upgrading and improving your 3D printer couldn't be easier - no matter whether you're looking for functional or aesthetic modifications. Discover the best improvements.","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","description":"Customize your 3D printer with hundreds of enhancements! Download spool holders, camera mounts, LCD covers, fan shrouds and even the Lack enclosure!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-17T18:49:23.950658+00:00","firstPublish":"2023-07-17T18:49:23.936607+00:00","datePublished":"2023-07-17T18:49:23.938394+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"Get rid of the control box and save a bit of space!","likesCount":10,"makesCount":0,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":68,"displayCount":485,"filesCount":3,"privateCollectionsCount":8,"publicCollectionsCount":7,"pdfFilePath":"media/prints/488183/pdfs/488183-ultracompact-cr-10-standalone-project-control-housing-9804036e-78ab-4848-9078-942ce72222c1.pdf","commentCount":1,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"2035542","filePath":"media/prints/488183/images/4278195_0e81f5b9-8d4f-417f-98b7-488487f4a66e/img_5703.jpeg","rotation":0,"imageHash":"TxgGBYComoqWZZhsqUeIf6pzT7n1","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"images":[{"id":"2035542","filePath":"media/prints/488183/images/4278195_0e81f5b9-8d4f-417f-98b7-488487f4a66e/img_5703.jpeg","rotation":0,"imageHash":"TxgGBYComoqWZZhsqUeIf6pzT7n1","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"}],"tags":[],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"2132290","filePreviewPath":"media/prints/488183/stls/4041846_77250b98-3de8-4102-9dd4-798939a8bdfc/cr10-mini-e3-control-box_preview.png","__typename":"STLType"},"license":{"id":"4","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"701651","handle":"Guvner76_701651","verified":false,"publicUsername":"Guvner76","avatarFilePath":"media/auth/avatars/d1/d1a79c63-e437-4274-a616-5da914ed975b.jpg","badgesProfileLevel":{"profileLevel":15,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"684147","name":"Neptune 3/4 Plus_Max Z-Axis Camera Mount","slug":"neptune-34-plus_max-z-axis-camera-mount","ratingAvg":"5.0000000000","likesCount":17,"liked":null,"datePublished":"2023-12-21T00:33:52.003287+00:00","dateFeatured":null,"firstPublish":"2023-12-21T00:33:51.999813+00:00","downloadCount":112,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-12-21T00:33:52.026223+00:00","image":{"id":"2539374","filePath":"media/prints/684147/images/5408481_ae741c41-8f81-490c-86ad-3ab18957c854_b7d20b54-cb1f-446c-b54e-5ab0f1704dfb/img_5971.jpg","rotation":0,"imageHash":"3fcJDIIzoFdsl4iMiIgsi38Y+w==","imageWidth":3165,"imageHeight":1905,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"701651","handle":"Guvner76_701651","verified":false,"publicUsername":"Guvner76","avatarFilePath":"media/auth/avatars/d1/d1a79c63-e437-4274-a616-5da914ed975b.jpg","badgesProfileLevel":{"profileLevel":15,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"556397","name":"Pen & Notes V2","slug":"pen-notes-v2","ratingAvg":"0E-10","likesCount":13,"liked":null,"datePublished":"2023-08-19T20:25:10.653382+00:00","dateFeatured":null,"firstPublish":"2023-08-19T12:30:28.257942+00:00","downloadCount":27,"mmu":false,"category":{"id":"29","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"29","name":"Office","nameEn":"Office","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-08-19T20:25:10.674025+00:00","image":{"id":"2122838","filePath":"media/prints/556397/images/4470969_88d197a9-1937-42b4-af47-9cc5aab5f18d/img_5777.jpeg","rotation":0,"imageHash":"mRgKFgTzmqh2eEeYZYlnaWZn95t4z3o=","imageWidth":2802,"imageHeight":3220,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"701651","handle":"Guvner76_701651","verified":false,"publicUsername":"Guvner76","avatarFilePath":"media/auth/avatars/d1/d1a79c63-e437-4274-a616-5da914ed975b.jpg","badgesProfileLevel":{"profileLevel":15,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"488182","name":"Ultracompact CR-10 Standalone Project - Legs","slug":"ultracompact-cr-10-standalone-project-legs","ratingAvg":"0E-10","likesCount":12,"liked":null,"datePublished":"2023-07-17T18:49:51.376209+00:00","dateFeatured":null,"firstPublish":"2023-07-17T18:49:51.374275+00:00","downloadCount":57,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-17T18:49:51.390270+00:00","image":{"id":"2035533","filePath":"media/prints/488182/images/4278182_f148feaf-6ed7-492f-9b37-e25bb7366225/img_5704.jpeg","rotation":0,"imageHash":"WBgSFYKYh4dweXmph5iIhpdgWQqG","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"701651","handle":"Guvner76_701651","verified":false,"publicUsername":"Guvner76","avatarFilePath":"media/auth/avatars/d1/d1a79c63-e437-4274-a616-5da914ed975b.jpg","badgesProfileLevel":{"profileLevel":15,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"439367","name":"10 Disk SSD Caddy","slug":"10-disk-ssd-caddy","ratingAvg":"5.0000000000","likesCount":11,"liked":null,"datePublished":"2023-04-16T18:09:32.733933+00:00","dateFeatured":null,"firstPublish":"2023-04-16T18:09:32.731482+00:00","downloadCount":76,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-04-16T18:09:32.753852+00:00","image":{"id":"1786973","filePath":"media/prints/439367/images/3737011_1a0bc5c4-74fd-4fce-aaa2-65934b9341d8/img_5563.jpg","rotation":0,"imageHash":"5igKDYL6Y3l4h3htpKiIevyIq5/I","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"701651","handle":"Guvner76_701651","verified":false,"publicUsername":"Guvner76","avatarFilePath":"media/auth/avatars/d1/d1a79c63-e437-4274-a616-5da914ed975b.jpg","badgesProfileLevel":{"profileLevel":15,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"488183","name":"Ultracompact CR-10 Standalone Project - Control Housing","slug":"ultracompact-cr-10-standalone-project-control-hous","ratingAvg":"0E-10","likesCount":10,"liked":null,"datePublished":"2023-07-17T18:49:23.938394+00:00","dateFeatured":null,"firstPublish":"2023-07-17T18:49:23.936607+00:00","downloadCount":68,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-17T18:49:23.950658+00:00","image":{"id":"2035542","filePath":"media/prints/488183/images/4278195_0e81f5b9-8d4f-417f-98b7-488487f4a66e/img_5703.jpeg","rotation":0,"imageHash":"TxgGBYComoqWZZhsqUeIf6pzT7n1","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"701651","handle":"Guvner76_701651","verified":false,"publicUsername":"Guvner76","avatarFilePath":"media/auth/avatars/d1/d1a79c63-e437-4274-a616-5da914ed975b.jpg","badgesProfileLevel":{"profileLevel":15,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"490699","name":"Ultracompact CR-10 Standalone Project - Power Supply Mounts","slug":"ultracompact-cr-10-standalone-project-power-supply","ratingAvg":"0E-10","likesCount":7,"liked":null,"datePublished":"2023-07-17T18:48:59.781786+00:00","dateFeatured":null,"firstPublish":"2023-07-17T18:48:59.780567+00:00","downloadCount":50,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-17T18:48:59.793823+00:00","image":{"id":"2035543","filePath":"media/prints/490699/images/4278203_0de64f2c-e8a1-412a-a465-0ab3f1bd9f27/img_5706.jpeg","rotation":0,"imageHash":"UggKDYKSmHeQSGWIqIp2eKChCRuK","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"701651","handle":"Guvner76_701651","verified":false,"publicUsername":"Guvner76","avatarFilePath":"media/auth/avatars/d1/d1a79c63-e437-4274-a616-5da914ed975b.jpg","badgesProfileLevel":{"profileLevel":15,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"545706","name":"Quick Bed Leveler!","slug":"quick-bed-leveler","ratingAvg":"5.0000000000","likesCount":6,"liked":null,"datePublished":"2023-08-06T16:17:58.149956+00:00","dateFeatured":null,"firstPublish":"2023-08-06T16:17:58.146344+00:00","downloadCount":24,"mmu":false,"category":{"id":"12","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"12","name":"Test Models","nameEn":"Test Models","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-08-06T16:17:58.172424+00:00","image":{"id":"2085548","filePath":"media/prints/545706/images/4388574_858095c6-23ed-48cb-aec4-21c2142f07c6/img_5751.jpeg","rotation":0,"imageHash":"ldcJFYg6mIqgbHZodKp3dgVoSQgl","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"701651","handle":"Guvner76_701651","verified":false,"publicUsername":"Guvner76","avatarFilePath":"media/auth/avatars/d1/d1a79c63-e437-4274-a616-5da914ed975b.jpg","badgesProfileLevel":{"profileLevel":15,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"518136","name":"Ultracompact CR-10 Standalone Project - TFT35","slug":"ultracompact-cr-10-standalone-project-tft35","ratingAvg":"0E-10","likesCount":4,"liked":null,"datePublished":"2023-07-31T01:08:05.514983+00:00","dateFeatured":null,"firstPublish":"2023-07-31T01:08:05.513021+00:00","downloadCount":39,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-31T01:08:05.529056+00:00","image":{"id":"2068028","filePath":"media/prints/518136/images/4350707_090e6239-cf3e-44fe-9a13-dc8fc5dbbcf1/img_5738.jpeg","rotation":0,"imageHash":"nRgSJYb4qHZ7h3d7d3d4evuXrI/I","imageWidth":3700,"imageHeight":2775,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"701651","handle":"Guvner76_701651","verified":false,"publicUsername":"Guvner76","avatarFilePath":"media/auth/avatars/d1/d1a79c63-e437-4274-a616-5da914ed975b.jpg","badgesProfileLevel":{"profileLevel":15,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"latestContestResult":null}}}