The reliable Original Prusa MK4S is now available in discounted bundles with the MMU3 and Enclosure. Grab yours today!

Ultracompact CR-10 Standalone Project - Legs

Get rid of the control box and save a bit of space!
12
56
0
317
updated July 17, 2023

Description

PDF

I picked up a CR-10 V1 and wanted a few upgrades and to get rid of the original control box. I tried a few different standalone projects, didn’t find one that I really liked, or that needed excessive modifications. I decided to build my own and 20 revisions later this is what I have. The print you download is what you see in the pictures and should fit both the original using original screws.  

 

As part of the Ultimate Standalone project there are also:

Ultracompact CR-10 Standalone Project - Control Housing

Ultracompact CR-10 Standalone Project - Power Supply Mounts

Ultracompact CR-10 Standalone Project - TFT35

 

You will want to print this with the larger holes up, as then no supports are needed for the screw holes. The fourth hole for the power legs are available, but honestly, I'm not using them as the leg is very stable with just the three original bolts.

You will need 2 screws/bolts for connecting the power supply socket.

Optional:

1 - https://www.amazon.com/BIQU-Rocker-Switch-Socket-Module/dp/B07KS2TQ45/

 

Basic guide Disassembly:

  1. Remember to label all cables before doing anything.
  2. Remember to label all cables before doing anything.
  3. Remove all the original legs but keep the screws.

 

Basic guide Assembly:

  1. Use the screws that you removed from the original legs.
  2. Add the basic three legs, two on the front, and one for the right rear.
  3. Choose the power leg you want to use.
  4. Attach the power socket and switch or the BIQU combination plug/switch.
  5. Attach the power leg to the Left Rear.

Model origin

The author marked this model as their own original creation.

License