Motorcycle Kickstand Adapter

Allow you to mount this motorcycle kickstand* to the Fiido Q1/Q1S when using an aftermarket motor extension. Likely does not fit the stock area, but feel free to remix and experiment.

We'll see how it holds up; I used PETG with 6 walls and 25% gyroid infill @ .2mm layer height. Print as oriented in the STEP file with no supports (the holes bridge just fine, and if they droop a little, just force the screw through ;D)

When used with the motor extension, you may need to size up the M6 bolts. Also, you'll need a 50mm'ish M5 bolt which is drilled in self-tapping style at the upper left as a spring retainer.

* (non-affiliate amazon link)