Touch ID Box with Button Press - no battery

Building upon Snazzy Labs, I made this Touch ID Box managing to maintain the keystroke of the button and having it entirely removable (no plastic melting).

This is the model 2, I removed the battery.

A few notes :

• Lightning port : 

1. Cut the metal part in front of the holes and enlarge the plastic to 2mm with a metal drill bit.
2. Use M2x5mm screws + bolts. A little finicky but doable.

• Pre-drill the fixing holes using a small screw before fixing anything. I had some 1.8mm screws lying around from laptop teardowns.
• Alternatively you can reuse the screws from the keyboard itself.
• Gently remove and stick the little square of black foam form the keyboard's chassis to the back of the button. It will help a little by acting like a spring.

That's pretty much it.

Thanks Snazzy Labs !

GLOUPY