Eve Weather mount and cover

This is a simple, but effective protective cover for the Eve Weather station. I needed this, because my location is rather windy, and the single screw that the station slides unto may not be strong enough.

The cover is strong, and holds the Eve Weather station firmly in place. Yet, it's fairly easy to detach the station from the cover, for battery changes.

This should print fine at either 0.4mm or 0.6mm nozzles, I printed mine with a 0.6mm for additional strength. But all walls and tabs are divisible by 0.4mm / 0.6mm, for an even number of perimeters. I printed with 5 perimeters with the 0.6mm nozzle, to assume no infills in the walls.

As for material, I printed with Overture PETG, to hopefully withstand sun (UV) and weather. Time will tell!