Remixed 0.05mm Resolution Dial Calipers -

This only contains the gcode for doing a true multi-colour print on a Prusa Mini+

"0_0.2mm_PLA,PLA_MINI_1h30m.gcode" does a true multi-colour print for the first two layers.

Start with the filament for the main body colour loaded.

Then after about 10 minutes of printing, it will unload the filament and prompt you for loading the filament you'll be using for the text.

After about 3 minutes of printing the numbers and the markers, it will unload the filament and ask you to reload the filament for the main body colour again.

The remaining print time is now about 76 minutes.

only contains the gcode for doing a true multi-colour print on a Prusa Mini+