XTool M1 Tube Guide

The XTool M1 if you don't purchase their air assist you need a way to mount the hose to the inside of the work area away from the moving head of the laser. The mount helps keep the hose out of the way and only needs 3M Tape in order to attach it to the Top Rim under the lid.

I hope this is helpful to anyone that may need it and not have to spend an arm and a leg to buy the proprietary model.

This model uses PLA.

.20 layer height

15% infill (This way you can add pressure and not break while pressing it onto the machine)

Wall 2

Top and Bottom 3