Endstop holder for S9; Halterung für Endschalter für S9

Endstop holder for Standard version of an Sculpfun S9.

There are 2 Holders, one is For the X-Axis one for the Y-Axis.

You need additional:

• Tool for M3-Threadcutting; or use an M3-Screw and cordless screwdriver and it onto the Hole while turing until the screw gets hot to form the treads.
• These Endstops, which are the same as the Orginal Endstops by Sculpfun https://www.amazon.de/dp/B09WXPHDRL?psc=1&ref=ppx_yo2ov_dt_b_product_details
• Screws DIN 912/ ISO 4762:
  • 4x M3 x 6 (for mounting Endstop-PCB onto holder)
  • 4x M3 x 8 (for mounting Holder onto frame)
• 2x Washers DIN 9021/SIO 7093 for  Y-Holder
• 2x Waschers DIN 125 / ISO 7089 for X-Holder
• 4x Hammerhead nuts for 6mm T-Slot, M3:
   https://www.amazon.de/dp/B09Y85JSXY?psc=1&ref=ppx_yo2ov_dt_b_product_details