Ender 5 Pro Electronics Box Replacement Lid (WIP)

//WIP// Still working on this //WIP//

This is my design to replace the lid in my Ender 5 Pro electronics box, this is so that I can fit a 140mm fan to it to take over from the Board Fan that came with it and aswell as the PSU fan, hopefully brining down the noise of the printer.

The fan goes on the outside, I shall be making another version for 120mm as request in the /r/Ender5 by a user.

This was cut into 2 parts so that it can be printed by my Ender 5 dimensions are 19.9mm x 19.9mm , I've found that the case has a variance of around 2mm, so measure your case beforehand or after print sand it down.

update 22/11/2020

I've added a 120MM fan version for those that have requested, I'm working on adding also a L shape bracket that will attach to the OEM PSU to secure the lid in, if you still keep it facing down the enclosure.

Print instructions

Unassociated tags: Ender 5 Pro

Category: 3D Printer Parts Summary

//WIP// Still working on this //WIP//

This is my design to replace the lid in my Ender 5 Pro electronics box, this is so that I can fit a 140mm fan to it to take over from the Board Fan that came with it and aswell as the PSU fan, hopefully brining down the noise of the printer.

The fan goes on the outside, I shall be making another version for 120mm as request in the /r/Ender5 by a user.

This was cut into 2 parts so that it can be printed by my Ender 5 dimensions are 19.9mm x 19.9mm , I've found that the case has a variance of around 2mm, so measure your case beforehand or after print sand it down.

update 22/11/2020

I've added a 120MM fan version for those that have requested, I'm working on adding also a L shape bracket that will attach to the OEM PSU to secure the lid in, if you still keep it facing down the enclosure.

Print Settings

Printer Brand:

Creality

Printer:

No

Supports:

0.2

Infill: