D.VA Meka

The default skin for D.Va's Meka in Overwatch.

• v3 Fixed, thickened, symmetrical and ready to print! Some of the detail is lost in the process, but at any scalle less than 30cm you'll probably not notice. Some sanding and pick work will get you a nice D.Va desktop figurine!
• v2 Much more geometry and a much larger file size (80MB). Not recommended for most people.
• v1 Initial release. 13/06 All makes are of this file.

This model is still very much a Work in Progress and will likely receive tweaks to ensure correct printing on all machines. There are a few thin bits I might strengthen and a lot of internal geometry that can be simplified; simple geometry, if you will.

If you decide to download this and print it, please provide feedback so I can continue to improve the STL files!

11/07/17 - Just noticed we've hit 1000 downloads! Thanks everyone for your support (3d printing pun) and providing such useful feedback for this project.

Print Settings

Printer:

HICTOP Prusa i3

Rafts:

Yes

Supports:

Yes

Resolution:

0.1

Infill:

25

Notes:

Print file is still being developed. Smaller than 8cm will cause problems.

This model is the default model used in game and has been gently ripped to ensure accuracy.

After a little bit of touch up in Blender, it is now ready for printers everywhere (probably).