A simple poop chute for the P1P held aloft by organic tree supports generated by the Bambu Slicer.
It is designed for a limited space around the printer.
Use the provided gcode.3mf file or feel free to play around with the tree settings in your slicer.
Just make sure that X-Y distance for the supports is set to 0 mm.
Model detail:
15x75x192mm
112,7g
Bambu Basic PLA
3h52min printtime on P1P @ 0.2mm layerhight
(If anybody ever wants this, vwx or dwg files would be available.)
The author marked this model as their own original creation.