iHSV57 Wirebox with optical fiber

I made this little cover box for all of the connections on the interface of the iHSV 57 servo motors from JMC.

Features included:

1. Holes for PG9 cable glands
2. Slots for optical fiber to read LEDs
3. Use the servo screws to hold in place

The tolerances are good, when mounted only liquid can enter the box.

I used cheap audio optical fiber from china, the holes are a little bit smaller so you will need to use the proper drill bit for your fiber! (Mine was 2.25mm diameter)

It prints better with 0.4mm nozzle for embossed texts