Harry Potter Closet door Pull

I needed a "Harry Potter" themed pull for the closet door, on my kid's room, so I took souviksaha's beautiful design and made some changes:

1. I resized for my needs

2. I added 2 holes on the back for some button stile neodymium magnets.

3. I split the model to separate the H from the P so I could use one on each door.

4. I realized that they would not fit on my 20cmx20cm bed, so I created on stl for each letter.

Came out great (except for some defect due to my inexperience with the material I used)

Print Settings

Printer:

Makerparts II all-metal

Rafts:

No

Supports:

No

Resolution:

.1

Infill:

20%

Filament:

Cobalt (metallic Blue)

Notes:

I should have used thicker top layer ... :-(

I used some crazy glue to set the magnets on the wholes behind the letters and placed a screw on the wood panel on top of the doors for the magnets to stick to.

the I used some all-purpose glue to glue each letter to the corresponding door and all done.

How I Designed This

I took souviksaha's beautiful design and made some changes:

1. I resized for my needs

2. I added 2 holes on the back for some button stile neodymium magnets.

3. I split the model to separate the H from the P so I could use one on each door.

4. I realized that they would not fit on my 20cm x 20cm bed, so I created on stl for each letter.