Bucket hook for Ruff Land crates

If you own Ruff Land crates, you know it is hard to make sure you have water available for your furry friend.

So with help from Llama, I created this hook to resolve that issue. The corners are also rounded to keep the hook from harming the furry friend, and from harming the crate.

PETG, ASA, ABS suggested.

Print with 6+ walls and 6+ top and bottom layers for strength. 15% gyroid infill is the most needed.

To use, slip the top of the hook through the door of the crate, and then let it pivot to “lock” into place. Then the bow on the water bucket slips into the bottom of the hook to be held up.

Added picture of it on a wire crate (not proper), but to give a better idea of how it works.