Aeon Trespass Odyssey - Labyrinth Tiles

This amazing game deserves the most beautiful terrain! :-)

Edit 12.2024: Printed the 5.2mm parts again and… they are a difficult print! They kept detaching. So, I had to add brims all around the red edges of the model and they detach correctly. Added folder called With Brims with the 3mf files for print setup for MK4S. Check filament settings as I have nozzle temp up due to hardened nozzle and bed lower due to my filament. 

I have created 4 tiles as needed for the game - print 4 of each - in two different versions:

• 2.0mm thick, so they can fit in any insert where the cardboard pieces can fit (as they are also 2mm thick).

• 5.2mm thick, as they look muuuuch cooler with more depth to them!

These must be printed with a 0.4 nozzle. 0.3 layer height worked well for me. Needs good bed adhesion for that complex first layer! I only tested the Z tiles, will update with pictures when I test the rest. 

I have included STL files, and 3mf with all the color through modifiers for use with the MMU.

Enjoy, give it a like, and check my other ATO items on the collection here. 

Based loosely on this model shared on the ATO discord server: https://www.thingiverse.com/thing:5981198

 Edit 02.2026 - thanks to Dusksorrow for pointing out the O tile was wrong! Now uploaded fixed one. I did not update the photos but do notice how one of the exit areas (with the green borders) are not where they are supposed to be.

Do note the 2.0mm 0 tile is not fixed...