Lithophane photo frame

Lithophane frame with back light.

My frame is painted satin black but can of course be printed i preferred color. If the back cover is printed in white, it will let light through and light up the background.

4:3 version will fit 140x105mm picture

16:9 version will fit 150x85mm picture

I use M3 knurl insert nut (use a soldering iron to "melt" them in place) in combination with M3x12mm countersunk screw, but a self tapping screw will also do the job.

Glue picture and support feet in place.

Image to lithophane converter: http://3dp.rocks/lithophane/

In the converter; adjust the image settings to "Positive image"

If your picture is 16:9 ratio, use 150 as maximum size in model settings.

If your picture is 4:3 ratio, use 140 as maximum size in model settings.

Link to led light: https://www.ebay.com/itm/184407851854

Kasstino Portable Mini Pocket Card Lamp 6 LED Nightlight USB Power Light Touch Dimmer https://amzn.eu/d/dhszhW5

Print Settings

Printer Brand:

Ultimaker

Printer: 

Ultimaker 3 Extended

Rafts:

No

Supports: 

No

Resolution:

0,2 mm

Infill: 

20%

Filament: Any PLA

Category: Decor