All-in-One EINSEY - RPi3/4 - Buck Converter Housing Unit

This print is for those who are looking to install octoprint onto the device and are looking for an all-in-one device to enclose their Raspberry Pi3 or Pi4 and Buck Converter for the Prusa i3 Mk3/s/+.

This design is specific to this particular buck converter [see bellow]

This case reuses all the bolts and nuts from the old EINSEY case. To remove the square nuts, use a small tweezer to help push the nut of its hole.

Additional Items needed:
4x M3x10-12 screws (case)
4x M3 nuts (case)
3x M3x6-8 screws (Raspberry Pi)
3x M3x6-8 screws (Buck Converter)
Raspberry Pi3 or Pi4B
Appropriate Sized Connectors
Appropriate gauge wires
buck converter (24V +/- to 5 +/-)

This case uses this specific buck converter (https://www.amazon.com/gp/product/B07HRGV7XD/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1), which does not require any soldering!

This Einsey-RPi3/4b Connector Kit includes everything you need. You can find the listing here:

https://ebay.us/DIaNjS

https://www.etsy.com/listing/952194499/prusa-einsey-raspberry-pi4-or-pi4-buck?ref=listings_manager_grid

Follow this Youtube Instruction to make your Installation Easier:

Print instructions

Category: 3D Printer Parts Print Settings
Printer Brand: Prusa

Printer: I3 MK3S MMU2S

Rafts: No

Supports: No

Infill: 40%