Nerf blowgun six shooter

Update: 20-11-2021 Problem that the stucked darts, after entering the barrel! Drill the first 80-100 mm of the barrel to 14 mm and the darts have enough speed and guidance to enter the tube/barrel whitout problems!

Canged version from the original from Natetru and working on the idea of cassiope34 to use a 16 mm PVC tube. Use only new darts and no used darts from flywheel guns they are to much damaged

needed parts: shaft round 4 x 95 mm, 2 ball-baerings 9x4x4 mm. O-ring 12x3 mm. 8x PT-srews 3x15 mm (or M3) and 12 magnets round 4 x length between 6 to 8 mm

Tubes in magzine and the magnets must stay the same or under/beneath the surface. The

main tube must have a a long countersunk side to correct smal misallinement small amount of oil is used on both sides of the magazine.

The O-ring will be pushed against the magazin on the moment of pushing your mouth against the mouth piece to assure a seal to prevend air escaping

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Resolution:

.2 Quality

Infill: 

Gyroid 50%

Filament: Prusament PETG Galaxy black

Notes:

Layers 5/5/5. Brim for printing the Cap. print on smooth PEI

Category: Toy & Game Accessories