DPS5005 DIN mounting box w/ banana connectors

Simple box to hold a DPS5005 (link here: DPS5005 ) on a DIN rail. I mounted all my tool holders and stuff with a DIN rail on the underside of a custom made bench, so I needed something to hold everything on it.

The banana connector used should be like this one, i cannot find the one I bought tho (Banana connectors ).

To mount it You can use either heatset inserts (i use Ruthex ones) or M3 screws that tap into the DIN clips (remix from @Bryan_81523). Just print 2 of the variant You chose and secure it in place to the box. Then print the cover and the thing is ready. I have the USB version so added a small opening for the USB port as well.