Cyclopes Mini PTFE Port

2 part model - ptfe port that mounts through the outside of the case and a nut that secures it in place from within.

Recommended Filament: None – I've printed with PLA, PA, and PC and all worked fine.

Nozzle Size: 0.4

Layer Slice: 0.16

Supports: Yes – for the ptfe port

Infill: 50% or higher - small part

PTFE Connector: https://www.aliexpress.us/item/3256802493948012.html?spm=a2g0o.order_list.order_list_main.5.21ef1802YebpSL&gatewayAdapt=glo2usa

Assembly:  You will need to remove the rubber gasket from the bottom of the PTFE connector;  Practically falls out.  Press fit into the top of the PTFE connector and install.