DTL150 electronic load enclosure
An enclosure for DTL150 electronic load enclosure that protectes the underside of the board and the radiator.
9
120
0
599
updated May 18, 2023
Description
PDFA two-pice clam shell held together by M3 screws and brass inserts.
Requires supports for the screw holes at the bottom.
Additional parts needed:
- 8 M3 brass inserts (the hole is for 6mm version but 3mm should also work)
- 4 M3 25mm screws
- 4 M3 6mm screws
I also added some stick-on rubber feet in mine.
Tags
Model origin
The author marked this model as their own original creation.
