4l Filament-Dry-Box System Quick&Easy

4l DryBox-System Quick&Easy

Align the drilling template with the narrow side on the first indentation of the box to get the right position of the holes (see picture). Use the back of the drilling template on the other side.

Use a 3mm drill . 

Assemble all with M3x10 screws, you need 4 per box.

The hygrometer is clamped in the lid with the clamping ring, no glue necessary

You need only one cap for all boxes. Assemble the handle with M3x10 oder M3x12. Push the PTFE tube through and glue it.

Use PLA, PETG, ASA for all parts except the clamping ring. Use TPU for the ring.

Amazon links:

Wildone Box: https://www.amazon.de/dp/B07L2QJ5LB?psc=1&ref=ppx_yo2ov_dt_b_product_details (order this!)

or

GoMaihe Box: https://www.amazon.de/dp/B08DCWKK4B?psc=1&ref=ppx_yo2ov_dt_b_product_details (you may have to expand it with a heat gun, they are very narrow in one place. without heatgun work only small rolls are working)

Hygrometer: https://www.amazon.de/dp/B07JG9QZ2B?psc=1&ref=ppx_yo2ov_dt_b_product_details

Silicagel: https://www.amazon.de/dp/B09VG9SCCT?psc=1&ref=ppx_yo2ov_dt_b_product_details (i used 2x 50g per box)