Remixed BMW e30 Throttle Body Clip Cable Guide Clip - 13541747519

The original clip weathered away after a solid use of 35 year.  also was extremely floppy(pun).

Made a couple adjustment for stability and less cable shaking inside the clip.

Let me know how it work out for the rest of you.

How to print.

For engine use recommended ASA or ABS any other high heat resist material. Might get away with PET since its off on top of the motor.  (still it is your throttle body, be responsible) 

Make sure when you install it your hear the throttle position sensor click, otherwise your idle will be off.

And test test test.

Print on its side with NO supports and more walls!  brim is recommended but not needed

Inspect regularly for warping, 3d printer parts can warp especially in the engine bay.

Fitment

• BMW 3-Series E30 (1983-1991)
• BMW 325 Coupe (1988)
• BMW 325is Coupe (1987-91)
• BMW 318i, 325e and 325es Coupe (1984-87)
• BMW 325i Coupe (1987-93)
• BMW 325iX and M3 Coupe (1988-91)
• BMW 3-Series E36 (1992-1999)
• BMW 318ti Coupe (1995-99)
• BMW 325is Coupe (1992-95)
• BMW 328i and 328is Coupe (1996-99)
• BMW 5-Series E28 (1982-1988)
• BMW 528e and 535is Sedan (1982-88)
• BMW 535i Sedan (1985-88)
• BMW 524td Sedan (1985-86)
• BMW 533i Sedan (1983-84)
• BMW M5 Sedan (1988)
• BMW 5-Series E34 (1989-1996)
• BMW 525i Sedan (1989-90)
• BMW 530i and 540i Sedan (1994-95)
• BMW 535i Sedan (1989-93)
• BMW M5 Sedan (1991-93)
• BMW 5-Series E39 (1996-2003)
• BMW 525i and 530i (2001-03)
• BMW 528i (1998-00)
• BMW 540i (1998-03)
• BMW M5 (2000-03)
• BMW 6-Series E24 (1977-1989)
• BMW 633CSi Coupe (1983) from 9/82
• BMW 633CSi Coupe (1984)
• BMW 635CSi Coupe (1985-89)
• BMW M6 Coupe (1987-88)
• BMW 7-Series E23 (1978-1986)
• BMW 733i Sedan (1978-84)
• BMW 735i Sedan (1985-86)
• BMW 7-Series E32 (1987-1994)
• BMW 735i Sedan (1987-92)
• BMW 735iL Sedan (1988-92)
• BMW 740i and 740iL Sedan (1993-94)
• BMW 7-Series E38 (1995-2001)
• BMW 740i and 740iL Sedan (1995-01)
• BMW 8-Series E31 (1991-1997)
• BMW 840Ci Coupe (1994-97)
• BMW Z3 (1996-2002)
• BMW Z3 Coupe Convertible (1999-02)
• BMW Z3 M Roadster Convertible (1998-00)
• BMW Z3 Roadster Convertible (1998-02)

Legal Disclaimer:  

Offroad Use Only: The automotive parts provided are intended for offroad use only. It is important to note that the use of these parts on public roads may violate local regulations, laws, or safety standards. The purchaser assumes all responsibility for ensuring compliance with applicable laws and regulations regarding the use of these parts.

3D Printer Parts: The 3D printer parts provided may be subject to failure or malfunction. It is essential to recognize that 3D printed parts may not possess the same strength or durability as traditionally manufactured components. The purchaser assumes all risks associated with the use of these 3D printed parts and is encouraged to exercise caution and common sense during their utilization.

Regular Inspection: It is recommended that all parts, including automotive and 3D printer parts, be inspected regularly for any signs of wear, damage, or failure. Routine inspection ensures early detection of potential issues and helps maintain optimal performance and safety. The purchaser is responsible for conducting regular inspections and addressing any identified concerns promptly.

Assumption of Risk: The user (person whom is using this part) acknowledges and assumes all risks associated with the use of these parts, including but not limited to property damage, personal injury, or any other harm that may arise. The purchaser agrees to hold harmless the seller, manufacturer, distributors, and any associated parties from any claims, damages, or liabilities related to the use of these parts.

By using these automotive and 3D printer parts, you indicate your understanding and acceptance of the terms and conditions stated in this legal disclaimer. If you do not agree with any part of this disclaimer, you should refrain from using these parts.