BTT Pi TFT43 V2.0 Touch Screen Mount for Voron Switchwire

I designed this to so that the BTT TFT43 V2.0 could be mounted to a Switchwire.

This drops about 15mm lower than the bottom of the skirts, so you will need some clearance.

The housing mounts to the skirts, in the same manner as the default part it replces.   The screen is held in by 4 M2.5x8mm socket head cap screws.  The accent pieces are secured with a couple drops of super glue.

There is a clearance cutout to allow space for the backlight adjustment wheel, but you will need to have your brightness adjusted to the level you want before assembly. After everything is assembled, you won't be able to access the adjustment wheel.

The honeycomb pattern will probably need supports.  Prusaslicer's organic supports have worked well for me printing the Voron 2.4 version on my printer.  There are also some overhangs, so some cooling is pretty helpful.  I printed mine in matte black PLA, and it's been holding up great for about 5 months.

The step files are included, should anyone wish to modify the model to fit a different screen.