openDTU / Ahoy with ESP-32S and NRF24L01+ Housing

Pressfit Housing for openDTU / ahoyDTU Datalogger.

Made this to the smallest factor that makes sense.

Used following Components to build:

• ESP-32S (used one from this set)
• NRF24L01+ (used one from this set)
• 6EA of the smallest Jumper Cable from this Set

Build:

• Print Out Housing and Cover
• Connect ESP32 with the NRF24L01+ Module acc. openDTU Schematic
• Roll Jumper Cables and rest the NRF Module inside the Housing as seen on Picture.
• Press on the Cover
• Plug in to USB Power 
• (Optional) Mount on desired place with a Screw