@ThorbenKreuer It looks amazing! I am tryin to do this project, but am not sure how to wire neopixel to neopixel. Would you mind showing how you wired the 2?
@KrissyJ11_746651 hey, I connected the LED with the connectors as shown on my picture. Took a while to check, that I need to scratch the wires outgoing from the LED because of the alloy. My first try was only connecting the wires with the connector but I had no power going through. Hope that helps a bit.
@ThorbenKreuer thank you so much! I had a really hard time trying to guide that out, but this definitely helped! I finally got it up and running and didn't blow a board in the process!
Finally done. Had some issues with the hot glue on the inner side but now its working fine :)
@ThorbenKreuer It looks amazing! I am tryin to do this project, but am not sure how to wire neopixel to neopixel. Would you mind showing how you wired the 2?
@KrissyJ11_746651 hey, I connected the LED with the connectors as shown on my picture. Took a while to check, that I need to scratch the wires outgoing from the LED because of the alloy. My first try was only connecting the wires with the connector but I had no power going through. Hope that helps a bit.
@ThorbenKreuer thank you so much! I had a really hard time trying to guide that out, but this definitely helped! I finally got it up and running and didn't blow a board in the process!