Popsicle stick (construction unit)

This model is done in Fusion360. Its a Popsicle construction unit toy to build what you can imagine.

The print is pretty simple. I printed it on Prusa Mini+ with 0,6mm nozzle and 0,2mm layer height. I used Prusament PLA Green and Vanilla White. I advice to print more of them at same time.

The popsicle stick can be cutted to multiple pieces so you can use one stick as 5 pieces. The best place to cut is indicated by triangle openings.

The stick is 10cm long, 1cm wide and 1,8mm thick. The connections are 2mm and 4 mm wide, therefore tolerance is 0,2mm per stick.

I hope that you will enjoy this simple model and I cant wait to see different structures and designs in comments!