AhoyDTU Case with ePaper Display

This is an enclosure for an AhoyDTU with ESP-WROOM-32 board and Ebyte E01-ML01DP5 transmitter.

Since I couldn't find a case for my AhoyDTU with ePaper display that I liked, I designed this case. I was inspired by the case of @andred_797657

The advantage of this case is that all parts are screwed or plugged in, no hot glue is needed.

Changelog:

• 17.05.2023: new Version v2 / without screws on the front and new display bracket
• 16.05.2023: first Version v1

I used the following components:

• diymore ESP-WROOM-32 with USB Type C
• EBYTE 2,4 GHz Wireless Module nRF24L01 (E01-ML01DP5)
• Waveshare 200x200, 1.54inch E-Ink display module 2 Color (Black/White) - SKU: 12955 (v2.1)
• Delock WLAN 802.11 b/g/n Antenna 12624
• 8x Thread insert M3 (4x v1)
• 4x M3x3 Screws (Display, only V2) + 8x M3x8 Screws (Back + v2: Display bracket)

The enclosure can be printed completely without support.
To do this, the display opening must be placed on the print bed.