extended rpi4 case for Ice Tower Low Profile cooling fan

I like the performance of the ice tower (low profile) cooling fan a lot. Unfortunatelly assembled it's deep and doesn't fit in the most of cases. Finally found a very nice base for an extended version. Beside the original parts only the back cover and the stands are modified. The cover is 15 mm deeper/higher and the stand 20 mm. The second advantage of the clearing due to the higher stands/feet is the possibility to keep the original screen rotation of the raspberry pi 7" display with the usb power plug on the bottom side. Why? The reason is the dependancy on the viewing angle of the screen. The original orientation is the best loking on the screen from a higher position down.

For the cover assembly 4x M3x16 (hex socket head cap) are needed.

I have printed my cases in Devil Design black PETG with the 0.6 mm (vanadium nozzle, not necesserly but was installed), layer height 0.3 mm, without any supports. Due to overhangs more intense cooling is recommended. The printer MK3S(almost +) with original structered PEI sheet from Prusa.