Typhon v7 Foxeer Predator camera mount

This is a fixed-angle mount for the Foxeer Predator nano v5 camera on the SouthEastFPV Typhon v7 frame. It's angled at 50° for my personal racing preference.

Design

The fit on the lens is pretty tight but should it should fit in there if your printer is well tuned. It's tight enough that even in crashes the angle shouldn't change.

Durability-wise, I don't have enough data in how the mount protects your camera but I reckon it should not be noticably different than other designs.

Print

Print the mount as it comes in the STL. Supports are recommended unless you know your printer handles overhags in TPU well enough for 50° angles. I recommend organic supports for best results.

Category: R/C Vehicles