xBloom Drip Tray

The missing drip tray for xBloom specialty coffee machines. Add this to your xBloom machine base to catch extra grinds and drips, then simply rinse and wash in the sink to clean.

The drip tray is sized to fit xBloom machines and is intentionally shallow (1/16" or ~1.6mm) to maximize space still available between mugs and the xBloom dripper.

Print Instructions

Suggested settings with TPU:

• 100% infill (does not make much difference with this model)
• 4 walls/perimeters
• At least 4 solid bottom layers (if not using 100% infill)
• 0.2mm layer height

The key to getting a good print with TPU is 1) LOTS of filament drying time before printing, and 2) slow speeds. The provided gcode likely needs to be optimized for your machine to find speeds that minimize stringing and globbing.

As shown, printed in Bambu TPU 95A at .2mm layer height with Bambu Labs X1C. Total print time with ironing ~3.5hrs.

If you don't want to print your own, I've also made these available for purchase on Etsy: https://www.etsy.com/listing/1482491851/xbloom-drip-tray

Need Help? Feedback?

If you have any questions or trouble with this print, or if you have suggestions for additional revisions, send me a message. Happy printing.

And while you're at it, help yourself to my other prints.