LAMP CANOPY - LAMPENBALDACHIN BEDROOM UPGRADE :)
Opis
PDFHere I created a lamp canopy because of the cables sticking out above the seiling light for a long time now.
I guess many of you have the same problem. (not only in your bedroom. But here you need to look to the seiling more!)
My cable was about 5.2 mm in diameter so I designed this element to fit it. I hope your cables are that diameter too. If not I can create one for you. Or you got inspired and created one yourself!
Simply push your cable through the holes and the canopy will hold without any help!
I printed without supports or brim
Have fun with my design!
Print instructions
Category: Household Summary
Here I created a lamp canopy because of the cables sticking out above the seiling light for a long time now.
I guess many of you have the same problem. (not only in your bedroom. But here you need to look to the seiling more!)
My cable was about 5.2 mm in diameter so I designed this element to fit it. I hope your cables are that diameter too. If not I can create one for you. Or you got inspired and created one yourself!
Simply push your cable through the holes and the canopy will hold without any help!
I printed without supports or brim
Have fun with my design!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
No
</div>Resolution:0.2
Infill:
100
</div>Filament:
Prusament PETG Chalky blue
Notes:
Simply print it. You may need a brim ,-)
Tagi
Pochodzenie modelu
Autor oznaczył ten model jako własne oryginalne dzieło. Zaimportowano z Thingiverse