Top hat handle for Voron 0.2

This is an easy mountable front handle for the top hat of a Voron 0.2

Benefits:

• It can be attached to the 1515 profiles without the need of drop in nuts
• No modification of the acrylic panels needed
• STL files beeing orientated in print orientation. No rotation, no support needed

Both models can be printed without support.

I recommend ASA/ABS and a layer height of 0.2mm.

Only parts you need is

• 1pc front top hat handle
• 2pcs bracket

Hardware required:

• 2pcs M3x8mm or M3x10mm screws

Instructions:

Put the brackets into the aluminum profiles, then the handle itself.

Tighten it with the M3 screws.

Done! :)