Carcassonne Tile dispenser

Took the tile holder, added some slots and a bank to make it as dispenser. You can now pull out the cards from beneath the stack in the dispenser. Features a counter on the backside and a lockable lid an top. Wich is optional of course. Just turn the meeple to lock/unlock the lid.

Instructions

Dispenser.

I printed with support, .35mm z-layer ABS.

Counter.

Needs mor precision, printed .1mm z-layer. Could use some sanding depending on outcome of the print. The counter is tiny.

Lid.

Print the parts. First put the lathces into the holds, then put the oval thing between them. Secure the axis with the meeple. Finally attach the spring tu the latches. I used a drop of glue, but that might not be neccessary.